双步进上差动刀车
Double-step Differential Cutter Lockstitch




羽绒服 棉衣 皮夹衣 切包
Down jacket Cotton jacket Leather jacket Cutting Bag

高转速:4000转/分
最大线迹长度:5mm
针杆行程:31.8mm
压脚提升:手动≥5mm膝控≥13mm
机针:DB*1 6.旋梭:自动润滑剪线专用旋梭
送料压脚送布量:8mm
送料压脚提升量:2.5mm-5mm
上差动送料用电机驱动,按键调节
针位大小可换
上差动设计,上送布量可调节,解决传统侧切扭、歪现象,使 复合面料缝纫更平整
针距电机驱动,按键调节
内置抬压脚
High rotational speed: 4000 revolutions per minute
Maximum trace length: 5mm
Pin stroke: 31.8mm
Foot press lift: Manual ≥5mm, knee control ≥13mm
Machine needle: DB*1
Rotary shuttle: A special rotary shuttle for automatic lubrication of wire cutting
Fabric feeding capacity of the feeding press foot: 8mm
Feeding foot lifting capacity: 2.5mm - 5mm
The upper differential feeding is driven by a motor and adjusted by buttons
The size of the needle position can be changed
The upper differential design enables the upper feeding amount to be a djusted, solving the traditional side cutting twisting and tilting phenomena, and making Composite fabrics are sewn more smoothly
The needle length is driven by a motor and adjusted by buttons
Built-in lifting and pressing feet
![]() | SP 5490-7/DC-STJ |
![]() | DBX1 |
![]() | 5 |
![]() | —— |
![]() | —— |
![]() | —— |
![]() | 8 |
![]() | 5 |
![]() | 4000 |









下载使用说明书